Bộ tiêu đề phim Star Wars in Hueforge

**This print needs a 0.2mm nozzle**

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm

The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.76mm

#000000 PLA Geeetech Black Transmission Distance: 0.1
#00ae42 PLA BambuLab Basic BambuLab Green Transmission Distance: 1
#9d2235 PLA BambuLab Basic Maroon Red Transmission Distance: 1.6
#ff7338 PLA Anycubic Vibrant Orange Transmission Distance: 3.7
#fce300 PLA BambuLab Basic Yellow Transmission Distance: 5.1
#00b1b7 PLA BambuLab Basic Turquoise Transmission Distance: 1.4

This print uses 6 unique filaments

Swap Instructions:

Start with Black

At layer #6 (0.56mm) swap to BambuLab Green
At layer #8 (0.72mm) swap to Black
At layer #9 (0.8mm) swap to Maroon Red
At layer #12 (1.04mm) swap to Vibrant Orange
At layer #17 (1.44mm) swap to Yellow
At layer #20 (1.68mm) swap to Turquoise for the rest.