Skip to main content
F3D
Nắp Chụp Bàn Làm Việc - Dành cho lỗ 60mm 1

2 images

Dụng Cụ Tiện Ích

Nắp Chụp Bàn Làm Việc - Dành cho lỗ 60mm

By cerdesigns_869462

Downloads
3
Likes
1
Views
43

Files 2 1.3 MB

  • grommet_1782576392.stepSTEP · 913.2 KB
  • grommet_1782576393.stlSTL · 463 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

A clean snap-in grommet for a standard 60mm bored desk hole. Drop it in from the top - four flexible cantilever arms grip the underside of the desk, the flange seats flush on the surface, and a raised collar with six open-top slots lets you seat and separate individual cables while the large open center passes the whole bundle.

FEATURES
- Fits a 60mm hole with a snug 0.4mm press fit
- Self-retaining: 4 snap arms grip the desk underside (no adhesive)
- 6 open-top cable slots to keep cables sorted; ~55mm open center for the bundle
- Flush flange that can't fall through the hole
- Prints without supports with barrel down

DESK THICKNESS
The snap arms are tuned for an 18mm desk, with enough flex to handle roughly 16-20mm. On thicker tops the flange still seats and the press fit holds it firmly from above.

PRINT SETTINGS
- Orientation: barrel down, collar up.  
- Supports: none if you print barrel down, collar up as in STL.
- Layer height: 0.2mm
- Walls/perimeters: 3
- Infill: 20-30%
- Material: PETG recommended (better snap-arm fatigue life and warmth tolerance);

PLA is fine for a one-time install

FILES
- grommet.stl - print file as is, no supports
- grommet.step - editable CAD solid for tweaks in your own software

Prints and remixes welcome.

Read more Show less

Print spec

Formats
stepstl
Model files
2
Total size
1.3 MB
Largest file
913.2 KB

0 comments

See all