Skip to main content
F3D
Ốp chân cột 6x6 với đường nối ẩn 1

1 image

Đồ Gia Dụng

Ốp chân cột 6x6 với đường nối ẩn

By JellyTitan

Downloads
7
Likes
1
Views
67

Files 7 729.8 KB

  • rail_notch_gate_5.375IN_1782563110.3mf3MF · 5 KB
  • post_gate_NO_NOTCH_5.375IN_1782563111.3mf3MF · 3.6 KB
  • rail_notch_back_5.375IN_1782563112.3mf3MF · 39.5 KB
  • post_cuff_NO_NOTCH_5.375IN_1782563113.3mf3MF · 6.5 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Cover's the base of US nominal lumber 6x6 columns, which usually end up about 5-3/8" to 5-1/2". These covers are wider at the base to cover Simpson Strong-Tie ABA66Z or BC60Z post attachment bases. Will also work with ABA66 or BC60 bases -  but skipping z-max coatings is not recommended.

The pieces slide together and the seam is at the corner so it shouldn't be visible. The offset between locking pieces is .1 mm,  so if your printer isn't calibrated, your gonna have a bad time.

Print in something that can withstand the elements, like PETG.

There is a variant that includes notches for a railing. If you don't need a notch, got with the files that have NO_NOTCHin the file names. 

All the default stl's are for 5-3/8" posts.

You'll probably need to tweak the dimensions - maybe even custom per post. I've included the parametric source file. Post dimensions, post corner rad, cover height, and all rail notch parameters are available as variables so you can dial it in nice and tight for your specific decks.

Please post any makes if you've got a pretty deck to share.

Read more Show less

Print spec

Formats
3mff3d
Model files
7
Total size
729.8 KB
Largest file
588.2 KB

0 comments

See all