Case for ESP8266MOD
BymiceciczeLikes0Downloads595
DIY
Vỏ bảo vệ Heltec T096 - Dành cho Meshcore hoặc Meshtastic
Remix of Vỏ Case H1 cho Heltec V3 chạy Meshtastic By muziworks
- Downloads
- 19
- Likes
- 9
- Views
- 176
- Remixes
- 0
- Comments
- 0
Files 3 7.5 MB
- T096_Case_Front_V6_1782457015.stlSTL · 5.5 MB
- T096_Case_Rear_V1_1782457016.stlSTL · 1.4 MB
- T096_Case_Rear_Extended_V1_1782457018.stlSTL · 562.9 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #405435
- Category
- DIY
- Published
Description
The original case design for the Heltec V3 Lora board has been modified for the Heltec T096.
Secure with a M3x12mm screw.
Fits:
- Battery up to 8mm x 30mm x 48mm (Extended version: 10mm x 30mm x 48mm)
- U.FL to SMA Pigtail 10cm long
- Your choice of SMA antenna up to 10mm in diameter at the base
Dimensions:
- 45.5mm x 64.6mm x 19.5mm [1.79in x 2.54in x 0.77in]
Battery Used
https://www.amazon.com/dp/B08TTS1PRT
I found step files which made it easier to modify here:
https://grabcad.com/library/h1-case-for-heltec-v3-running-meshtastic-cad-1/details?folder_id=14229409
Print spec
- Formats
- stl
- Model files
- 3
- Total size
- 7.5 MB
- Largest file
- 5.5 MB
0 comments
You may also like 12 models
See all-
-
Còi Tàu Hơi Nước Mini
ByfifindrLikes500Downloads4K -
-
NewPocket-Size Third Hand Mini Spring Loaded Vise
ByrjunLikes0Downloads301 -
MeshJoy enclosure
ByyuriyLikes0Downloads142 -
NewSolderMate - Fully 3D Printed Desk Soldering Companion
ByleonicLikes0Downloads1.4K -
Bộ sưu tập 11 nhân vật mô hình Mecca Chameleon in 3D vui nhộn
ByZED4EverLikes313Downloads5.2K -
Cable Mount - Kẹp Giữ Dây Cáp (Có Lỗ Bắt Vít)
ByVC_DesignLikes271Downloads755 -
Hộp bảo vệ 3D cho Shelly 1 / 1PM Case - Gọn gàng và an toàn
Bymrfixit_324954Likes65Downloads477 -
NewAAA Battery Case
Bylab-96Likes0Downloads104 -
Dụng cụ mở hộp nhỏ gọn | Dao cắt thùng carton an toàn in 3D
ByDan Schwartz SchwartzLikes744Downloads3.4K -
Bộ chuyển đổi từ khe Keyhole sang thanh ray DIN!
ByBrokentooth_designsLikes83Downloads452
