Skip to main content
F3D
Robot Gripper - Mô hình tay kẹp robot cơ khí 1

1 image

Máy In 3D

Robot Gripper - Mô hình tay kẹp robot cơ khí

By AkshajGrandh_4084780

Downloads
3
Views
59

Files 1 90.3 KB

  • Assembly_1_Copy_1_Copy_1_2_1782455068.3mf3MF · 90.3 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#405423
Category
Máy In 3D
Published

Description

1. Build the Base and Center Core

  • Align the two large main frame halves (grey) so their center channels face each other.

  • Place the central teal rod assembly right into the center channel, ensuring the rectangular block is captured inside the middle cavity.

2. Connect the Inner Linkages

  • Use the short grey linkage bars to connect the central teal block to the inner holes of the main frame.

  • Secure these pivoting joints using the bolts.

3. Attach the Outer Linkages

  • Position the longer blue linkage arms on the outer sides of the main frame.

  • Insert bolts through the linkage ends into the outer holes of the frame to establish the scissor-action movement.

4. Mount the Gripper Jaws

  • Position the two large, T-shaped teal gripper jaws at opposite sides of the assembly.

  • Line up the free ends of both the blue and grey linkages with the holes on the gripper jaws, then pin them securely in place with the remaining bolts.

5. Final Alignment

  • Check that all 20 screws/bolts are properly seated and level.

  • Ensure the connections are snug but not overtightened so the entire mechanism can smoothly expand and contract.

Read more Show less

Print spec

Formats
3mf
Model files
1
Total size
90.3 KB
Largest file
90.3 KB

0 comments

See all