Giá treo và lưu trữ đĩa Disc Golf

This is a hangable storage solution for disc golf discs with separate rack and hanger for adjustable length, able to fit on in a Core One print volume. The rack is primarily designed to fit 15mm (Diameter) round stock but using adapters it can be sized down. I would not recommend going under 10mm as the wooden bars I’ve tested start to bend enough to let discs fall through.

The nubs are angled and can be a bit hard to fit into the hanger, I’ve not put any relief into the design and both the nub and the hole are the same size. This seems to work fine on my printer as I get a slight friction fit that still easily comes off. If you need to adjust the relief, you can use the link below and export the design.

Onshape link if you want to edit

Materials needed:

• 15mm (Diameter) wooden round stock 

• or 10mm with adapter

Print settings:

• PETG or PLA

• 2 perimeters

• 20% infill