Skip to main content
F3D
HSW Hygrometer – Nắp đậy Honeycomb Storage Wall cho Monotub 1

2 images

DIY

HSW Hygrometer – Nắp đậy Honeycomb Storage Wall cho Monotub

By GingerBeardCo

Downloads
3
Views
42

Files 2 9.5 MB

  • NSMT_HSC_0.16_1782388502.stlSTL · 7.8 MB
  • NSMT_HSC_0.16_1782388503.3mf3MF · 1.7 MB

Make a variant with AI

Build another version of this model.

Open Studio

Description

The latest version 0.14 removes unneeded pars and makes this easier to print. This part is not friction fit for a nice snug fit. In the future I'll add print profiles and models for other brands.

This is a remix of the HSW Hygrometer – Honeycomb Storage Wall, redesigned as a cap cover for the NorthSpore Monotub.

Instead of mounting a hygrometer to a honeycomb wall, this version adapts the geometry into a functional lid insert for monotub airflow management.

🔧 Design Features

  • Fits securely into monotub ports

  • Maintains airflow while providing coverage

  • Designed with spacing between the hygrometer and air holes to allow room for filter material

  • Easy to print and swap

This spacing helps support proper filtration without restricting airflow.

🧩 Notes

Tested on the NorthSpore Boomr Bin monotub.

This is part of an ongoing set of functional upgrades for the NorthSpore system.

Still dialing in the design, but it’s working well so far.
If you use it or improve it, feel free to share feedback.

⚠ Material Recommendation

This part is designed with a slightly oversized fit to create a proper seal in the monotub port.

Because of this, I do not recommend printing it entirely in PLA or other rigid materials, as it may not fit correctly.

For best results, I used a combination of TPU 95A and PLA+:

  • TPU provides the flexibility needed for a tight seal

  • PLA+ adds structure and stability

Printing in only rigid materials may result in a poor fit or difficulty inserting the plug.

Read more Show less

Print spec

Formats
3mfstl
Model files
2
Total size
9.5 MB
Largest file
7.8 MB

0 comments