Skip to main content
F3D
Nút bịt thay thế cho ống tưới Gardena 4.6 mm 1

3 images

Đồ Gia Dụng

Nút bịt thay thế cho ống tưới Gardena 4.6 mm

By Pat_S_1258084

Downloads
3
Views
48

Files 1 95.5 KB

  • Gardena_4.6_mm_sealing_plug_1782385958.3mf3MF · 95.5 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

English

This model serves as a functional replacement for a Gardena 4.6 mm end cap. If you need to seal the end of a hose in your drip irrigation system and don’t have an original end cap to hand, this 3D-printed version is the perfect replacement.

Dimensions:

  • Height: 17.6 mm

  • Diameter: 9 mm

Printing instructions:

To ensure the plug is water-tight and can withstand outdoor conditions (UV radiation and temperature changes), I recommend the following settings:

  • Material: PETG (necessary for weather resistance, UV stability, and flexibility when sealing)

  • Layer height: 0.15 mm

  • Perimeters / Wall loops: 4 (important to prevent water from leaking through the walls)

  • Infill: Standard (e.g., 15%–20%)

  • Infill pattern: Any

  • Supports: No support needed

If you like the model, a like and a make would be nice. Thank you in advance!

Deutsch

Dieses Modell dient als funktionaler Ersatz für einen Gardena Verschlussstopfen 4,6 mm. Wenn du ein Schlauchende in deinem Tropfbewässerungssystem verschließen musst und gerade keinen Original-Stopfen zur Hand hast, ist diese 3D-gedruckte Version der perfekte Ersatz.

Abmessungen:

  • Höhe: 17,6 mm

  • Durchmesser: 9 mm

Druckanleitung:

Damit der Stopfen absolut wasserdicht ist und den Bedingungen im Außenbereich (UV-Strahlung und Temperaturschwankungen) standhält, empfehle ich folgende Einstellungen:

  • Material: PETG (notwendig für die Witterungsbeständigkeit, UV-Stabilität und die nötige Flexibilität beim Abdichten)

  • Schichthöhe: 0,15 mm

  • Perimeter / Wandlinien: 4 (wichtig, damit kein Wasser durch die Wände diffundiert)

  • Füllung (Infill): Standard (z. B. 15 %–20 %)

  • Infillmuster: Egal

  • Stützen (Support): Kein Support notwendig

Wenn euch das Modell gefällt, wäre ein Like und ein Make nett. Danke dafür im Voraus!

Read more Show less

Print spec

Formats
3mf
Model files
1
Total size
95.5 KB
Largest file
95.5 KB

0 comments

See all