
Kẹp giữ sợi nhựa Parametric tùy chỉnh
- Downloads
- 8
- Likes
- 1
- Views
- 49
- Remixes
- 0
- Comments
- 0
Files 9 5.9 MB
- filament_clip_1782376710.scadSCAD · 6.1 KB
- filament_clip_simplified_1782376711.scadSCAD · 2.1 KB
- filament_clip_bambu_spool_1782376712.3mf3MF · 115.5 KB
- filament_clip_bambu_spool_x_12_1782376712.3mf3MF · 134.2 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #404235
- Category
- Máy In 3D
- Published
Description
A small, secure and sturdy filament clip with a quick and easy fit that can be customised to fit any type of spool.
There are a lot of filament clips out there, but I wanted something that was really quick and simple to install and just worked.
There are two versions here - one with rounded corners and one without. Both use the same parameters for dimensions, but the simplified version does not include corner rounding and is_much_ quicker to render. Both versions have the same functionality, but after making the simple version I went down a hole doing the "what if..." thing, and the grip fingers and a few more parameters were added, followed by rounding the corners. So the script size blew out, and so did the rendering time.
Preview rendering on the main (rounding) version has been deliberately kept on the low side to reduce the minkowski rendering burden while customising. Smoothing is automatically increased on final rendering.
The inside finger does an excellent job of locking under the inside lip on the Bambu spools when you put it in the right spot.
Customisable parameters include: clip width from side to side clip height (of the arms) clip wall thickness gap width for the spool rim filament diameter offset of the notch for the filament from the top of the clip to suit your preference (but it locks in quick and simple in the default location) include a "grip finger" on the bottom of the inner arm (individual selection on the main version) include a "grip finger" on the bottom of the outer arm (individual selection on the main version) grip finger thickness (grip fingers on the simplified version are turned off by reducing the thickness to zero) corner rounding radius is adjustable on the main version you can choose to turn the rounding off on the sides of the main version
Defaults are good for Bambu Labs spools.
Clips are oriented side down to the plate to increase strength and negate any requirement for supports. They print nicely without brim or ears, but make sure your plate is clean.
Category: 3D Printing
Print spec
- Formats
- 3mfjsonscadstl
- Model files
- 9
- Total size
- 5.9 MB
- Largest file
- 3.4 MB
0 comments
You may also like 12 models
See all-

-

-

-
New -

-

-

-

-

-

-
New -
New

