
Mô hình giải đố Cubboard - Thiết kế thông minh
- Downloads
- 9
- Likes
- 1
- Views
- 85
- Remixes
- 0
- Comments
- 0
Files 5 1.8 MB
- cupboardPiecesPlain_1782371068.stlSTL · 18 KB
- cupboardDoor_1782371069.stlSTL · 226.1 KB
- cupboardPiecesSeg_1782371070.stlSTL · 307.9 KB
- cupboardBox_1782371071.stlSTL · 1,012.6 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #404125
- Category
- Đồ Chơi Trí Tuệ
- Published
Description
Cupboard
This time a piece of furniture was our source of inspiration for a new dynamic space packing puzzle. The goal is to pack a cupboard with four polycubes and close both doors.
Opening the doors will affect the internal space in such way that it quickly obstructs inserting any new pieces. Out of almost 3k theoretical assemblies there is only one solution.
Since rotation is involved and six moves are needed to get the last piece in, this is quite a challenging task which requires spatial imagination and mechanical insight.
Printing Instructions
Print all parts as oriented in the STL files.
The recommended print settings are 0.2mm layer height, with 2 perimeters and 4 top/bottom walls and 15% infill. The poly cube pieces can be printed with 3 walls and up to 50% infill to give them more weight.
There are two versions of the pieces and you can choose either depending on your visual preference.
You can print a color change by layer height to have the knobs on the doors a different color as shown in one of the pictures.
No supports are necessary for any part.
Insert the 2 doors as shown in the picture. Insert one peg into its hole and slide the opposite peg along the far wall and into its hole. The wall will flex out enough to permit the assembly.
Difficulty
3.5 out of 5
The Printable Puzzle Project
The Printable Puzzle Project aims to make available high-quality open-source models of many puzzle designs. All of our models are posted with the generous permission of their designers and are licensed for non-commercial use only. Anyone may print copies for their own personal use, but selling or otherwise monetizing them is not permitted, and puzzle designers retain all rights as copyright holders of their work.
Our puzzles are modeled using the open-source puzzlecad library. The .scad file is included with this model in case you want to modify any of its design parameters; more information on how to do this can be found in the PPP Puzzle Modeling tutorial.
The "No Problem Puzzle Collection" contains many puzzles with complicated boxes that would be too hard to model using open-scad. Additionally the original design files for the boxes have been lost due to a hd-fault. That is why these puzzles only contain scad-files for the pieces.
About The Designers
From November 2020 to April 2023 Theo Geerinck and Symen Hovinga collaborated under the trading name of "No Problem Puzzles" to design and produce their puzzles. Many of their unique packing puzzles introduce fascinating features such as moving or sliding doors and elements. These features and the way they behave always add a playful new dimension to the more familiar exercise of packing shapes. Those puzzles could once be purchased through an online printing service. Alternatively, for those who owned a 3D printer the files could be obtained from Symen.
However, after the tragic loss of Symen, purchases through the ‘No Problem Shop’ was no longer possible. Therefore, Theo decided to publish the designs so that everybody can create 3d-printed copies to be enjoyed for personal use.
Print spec
- Formats
- stlzip
- Model files
- 5
- Total size
- 1.8 MB
- Largest file
- 1,012.6 KB












