Con quay Stargate Spinning Top

I liked the pull-cord design, and was having issues designing my own, so I used the design from the original creator and modeled in the design of the Stargate (and the symbols) by hand. It's not a perfectly balanced top, but it spins pretty well! I did multicolor to color the chevrons, but didn't have any grey for the gate part itself, so I used a copper color. 

The .3MF file has the pre-cut files, scaled up to 150%, and the ripcord would need to be scaled to 150% as well. 150% is a good compromise in my opinion to get the most detail in the print, as with a 0.4 nozzle, you lose a lot of the detail in the symbols. 

Using a 0.4 nozzle the settings I changed were (if using the .STL's):

Wall Generator: Arachne

Scaled to 150%

Cut the bottom portion about 5mm from the top gives good, no-support needed prints, and the parts thread together easily.