Vỏ bảo vệ máy đo linh kiện LCR-T4

Case for the LCR-T4 with power switch, parts tray and extra connector for external functionality. The extra connector is optional, it gives you the option to make a plug to attach test leads for testing components that don't fit in the tester of is still inline (Note that this isn't the best option and can give unreliable test results).

Update: Added files to make the JST-plug and a cover if you don't want it.

Material needed:

• 3D-printed parts

• 1pcs LCR-T4 

• 1pcs Switch (Mounting hole: 13x18,5 mm)

• 5pcs M3x6 Self tapping screws (Ex: DIN7981)

• 4pcs M3x10 Self tapping screws (Ex: DIN7981)

Optional:

• 1pcs JST-XH Male 3-pin

• 1pcs JST-XH Female 3-pin

• 2pcs M2x5 Self tapping screws (Ex: DIN7981)

• 2pcs M2x8 Self tapping screws (Ex: DIN7981)

• Some wire to extend the power and connect the JST-XH

Print Settings

Rafts:

No

Supports: 

Yes

Resolution:

0.2

Infill: 

20%

Filament: PETG
 

Notes:

No support needed for the top case or JST cap.
Support on build plate for the bottom case and battery lid.

I recommend adding a brim to all parts to help with bed adhesion!

Category: Electronics