Giá đỡ pin trong thùng gỗ tổ chức đồ vật

Proudly my most detailed model so far which also looks great in brown or wood filament.

Can be used with or without inserts to hold what you need.

I added an insert for each of the batteries that I have and was able to physically test:

• AA batteries
• AAA batteries
• GoPro Hero 7 Black batteries
• Gopro Hero MAX batteries

but I can add more inserts if you think you need a different one, just let me know.

PRINTING TIP

I noticed that some battery brands are slightly wider than others so I added a test file for each of the inserts, so you can test it first. Scale it up by 0.5 - 1% increments if needed and dont forget to scale the crate the same amount. (so first print the insert and after testing you can print the crate with the same scale)

Recommended settings:

Material: PLA/PETG

Layer height: 0.16 - 0.2

Nozzle diameter: 0.4 or 0.6

Infill: 10-12

Perimeters: 2

Supports: NO, as long as your layer height is not too big, mainly because of the details of the horizontal tables.

You can see my other models here:

MEAFdesigns | Printables.com

________________________

If you like my designs and want to support me or sell physical prints, you can check out my patreon

https://www.patreon.com/meafdesigns

________________________