Gantry gắn ngược cho Bondtech Indx trên Voron V2.4
ByhartkLikes59Downloads118
Máy In 3D
Dụng cụ hỗ trợ lắp nam châm cho Bondtech INDX Toolholder
- Downloads
- 5
- Likes
- 6
- Views
- 105
- Remixes
- 0
- Comments
- 0
Files 4 1.8 MB
- Tool_Holder_Magnet_Jig_1782292961.stepSTEP · 444.6 KB
- Tool_Holder_Magnet_Jig_1782292962.f3dF3D · 798.3 KB
- INDX_TH_Mag_Tool_A_1782292963.stlSTL · 314.6 KB
- INDX_TH_Mag_Tool_B_1782292964.stlSTL · 239.9 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #402767
- Category
- Máy In 3D
- Published
- License
- GNU General Public License v3.0
Description
Simple tool to assist with consistently installing the 3x8mm magnets into the INDX toolholders.
Requires:
M3x8 SHCS x2
Thread the M3x8 SHCS into the top half of the tool.
Make sure the 3x8mm magnets are oriented correctly (use an INDX tool to make sure) and attach the magnets to the ends of the M3x8 SHCS. Press into the toolholder using parallel pliers or a vice.
Print spec
- Formats
- f3dstepstl
- Model files
- 4
- Total size
- 1.8 MB
- Largest file
- 798.3 KB
0 comments
You may also like 12 models
See all-
-
Kẹp giữ sợi Filament
Bytinx_1344834Likes1.2KDownloads6K -
CORE One/+ INDX printed parts
Byprusa-researchLikes0Downloads2.7K -
Bộ Stealthskirts nâng cấp cho Siboor Trident 300 (Hỗ trợ HDMI5 v1.2)
BySmolboiLikes39Downloads119 -
Giá đỡ Neopixel cho Voron V0.1 (Bản tùy chỉnh từ nikolasbabetas)
ByAnthonyDouri_1604724Likes24Downloads221 -
Prusa Core One – INDX Spoolholder Caps
Bypeter-van-der-waalLikes0Downloads254 -
Top hat 100mm cho Voron Trident/2.4
ByDanielSeiber_2423012Likes1Downloads8 -
Khay Đựng Hạt Hút Ẩm Cho Lõi Cuộn SUNLU Spool
Byarhi_585078Likes64Downloads540 -
INDX Rear Filament Sensors Holder V2
BykingnothingLikes0Downloads180 -
Cảm biến sợi nhựa CoreOne INDX với khớp nối PTFE | M5 M6 M10
ByfilamentalistLikes71Downloads109 -
Dummy 13 Weapon Pack – Sword, Knives, Trident & Rifle Accessories
Bypanda-studioLikes0Downloads249 -
Core One INDX Tool Holder Tapping Helper
Byanthony-coombesLikes0Downloads140
