Skip to main content
F3D
Stud KlickFast cho radio Motorola (thay PMLN8025A) 1

3 images

Dụng Cụ Tiện Ích

Stud KlickFast cho radio Motorola (thay PMLN8025A)

By vifino

Downloads
5
Likes
1
Views
48

Files 1 22.4 KB

  • klickfast-motorola-dp_1782288393.3mf3MF · 22.4 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

After my frustrations with the original Motorola/Peter Jones Stud for Motorola Radios (PMLN8025A), I decided to design my own Klick Fast compatible stud that is both cheaper and less easy to damage.

I've only verified it with my MotoTRBO DP4801e and R7, but it should be compatible with the following radios:

  • DP2000 Series (DP2400, DP2400e,  DP2600, DP2600e)

  • DP4000 Series (DP4400, DP4401, DP4600, DP4601, DP4800, DP4801)

  • DP4000e Series (DP4400e, DP4401e, DP4600e, DP4601e, DP4800e, DP4801e)

  • R Series (R2, R5, R7, R7a)

  • MTP3000 Series (MTP3100, MTP3150, MTP3200, MTP3250, MTP3500, MTP3550)

  • MTP6000 Series (MTP6550, MTP6650, MTP6750, MXP600)

The main benefit over the original model is that the latch to unhook the stud is bounded by the rest of the model so that the compliant locking lever isn't broken off accidentally.

Printing:

  • Orientation should be as the model comes. Flipped 180 degress could work well too, but I haven't tested it.

  • It needs supports from build plate. Organic supports work well.

  • Layer height: 0.15 works well with the dimensions and strength, but 0.2mm should work okay too.

  • Perimeters: At least 3 are recommended.

  • Material: Some high strength material like PC or Nylon are suggested, but PLA should probably last a while too.

Read more Show less

Print spec

Formats
3mf
Model files
1
Total size
22.4 KB
Largest file
22.4 KB

0 comments

See all