Skip to main content
F3D
Bracket kẹp pole kệ lưới, có captured nut và zip ties 1

2 images

DIY

Bracket kẹp pole kệ lưới, có captured nut và zip ties

By gamebofh_1257683

Downloads
7
Views
81

Files 8 1.2 MB

  • wireshelf_pole_base_1782286499.stlSTL · 110 KB
  • Wireshelf_pole_base_1782286500.f3dF3D · 175.3 KB
  • Wireshelf_pole_base_1782286501.stepSTEP · 91.6 KB
  • Wireshelf_pole_base_-_ridges_1782286502.f3dF3D · 236.8 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#402311
Category
DIY
Published

Description

Overview

I needed to mount a 10" rackmount system onto some wire shelving.  This bracket helps with that.

  • Assembly is pretty straight forward.  Put the nut in the hole, and then thread the screw in to whatever you need.  The zip ties should slide through easily.  

  • It's currently sized for a #8 screw and machine nut, but model is parametric and should allow you to change most of these things pretty easily. 

  • The "additional_back_plane_offset" makes that portion a little thicker.  I needed to do that because I only had 1/2" screws and I didn't want the screw poking through to push it away from the pole.

  • It's designed to be printed on "the back" so that the layer lines are perpendicular to the stress from the zip ties. 

Update 6/21/2026

This works great as long as you have some other way to prevent the thing this is attached to from sliding.  But, there is a reason the poles have that little groove, so depending on where a groove might be convenient for you, I've created three new models and uploaded new step and fusion files.

  • top ridge - just above the top zip tie 

  • middle ridge - between the zip ties, over the bolt location

  • bottom ridge - just below the bottom zip tie

    • "Um... it's symmetric, so if you just flip it the other way this is the same as top ridge, right?"  Yes.  But I thought of that after I had uploaded and I'm now punishing myself for being dumb by immortalizing this on printables, so it's staying.

Files

  • STL

  • Fusion360

  • Step

Read more Show less

Print spec

Formats
f3dstepstl
Model files
8
Total size
1.2 MB
Largest file
236.8 KB

0 comments

See all