
Bao đựng đá mài lưỡi hái (Honing Stone Sheath)
- Downloads
- 3
- Likes
- 1
- Views
- 46
- Remixes
- 0
- Comments
- 0
Files 5 25.2 MB
- Honing-stone-sheath_1781215158.3mf3MF · 549.5 KB
- Honing-stone-sheath_1781215159.stlSTL · 7.5 MB
- Honing-stone-sheath-wide_1781215160.stlSTL · 7.5 MB
- Honing-stone-sheath-extra-wide_1781215162.stlSTL · 7.5 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #401871
- Category
- Đồ Gia Dụng
- Published
- License
- Creative Commons — Attribution
Description
Introduction
A practical belt-mounted holder for a traditional scythe whetstone (honing stone).
When mowing with a scythe, the blade is regularly touched up using a wet whetstone carried at the waist. This holder keeps the stone immersed in water while working in the field, helping the stone cut efficiently and preventing glazing or clogging.
The design is inspired by traditional European scythe stone holsters, but adapted for modern 3D printing. It is suitable for elongated scythe honing stones of the common tapered type.
Features
-
Holds water for wet sharpening
-
Belt hook / belt attachment for field use
-
Lightweight and durable
-
Rounded interior for easy cleaning
-
Printed as a single piece
-
Suitable for traditional mowing and historical demonstrations
Compatibility and Options
The sheath is modelled after honing stones by the German manufacturer FRIEND. It fits many European-style stones. If you want more clearance, or if you use a differently styled honing stone, try one of the larger sizes that are also available here.
Usage
Fill the holder partially with water and insert the whetstone before mowing. During work, the stone remains wet and immediately accessible for quick honing of the blade edge.
Depending on the exact shape of your whetstone, the fit may vary slightly. The holder is intended for the typical long, narrow scythe stones commonly used in Europe.
Printing Notes
-
Easiest to print upright, tip up.
-
PETG is recommended for outdoor use and water resistance.
-
If needed, apply a thin sealant coating or increase line width for improved waterproofing.
-
Model fits 180-mm print space for support-less printing with mini-size printers.
-
Just to be sure, I use a few mm of brim on the inside, which is really easily removed after print.
Happy mowing!
Print spec
- Formats
- 3mfbgcodestl
- Model files
- 5
- Total size
- 25.2 MB
- Largest file
- 7.5 MB
0 comments
You may also like 12 models
See all-

-

-
New -

-

-

-

-

-

-
New -

-
New

