Canopy cho AtomRC Swordfish

I wanted for my Swordfish to have FPV camera with maybe even an instrument panel. After a bit of tinkering, a couple of prints I came up with this.

The canopy is designed to be printed as one piece, I used 1wall with 5 - 8 % infill. 
It allows for 4s1p 21700 pack in the nose part and made me add about 10g in the tail to compensate. 

The holes are for GM3  / C20T gimbal and I also added a servo hole if someone wants to only use a simple servo for panning. 

I include STLs and STEP files if anyone wants to tweak the design. 

Prints without supports if placed on the back side if your printer is dialled in properly.