Vỏ Case cho Radxa ROCK 4C+

Here you find two cases for the RADXA ROCK 4C+ :

One for the card alone (files ROCK_4C+_case.3mf and ROCK_4C+_case.stl) ,

the second for the card and official heatsink S2Pi (ROCK_4C+_heatsink_case.3mf, ROCK_4C+_heatsink_case.stl)

To mount the card alone (ROCK_4C+_case), you will need M3 x 8 mm screws and four M3 x 5 x 4.2 mm brass insert nuts.

To mount the card with its cooling system (ROCK_4C+_heatsink_case) in the mounting box, you will need two M2.5 x 12 mm screws, two M3 x 5 x 4.2 mm brass insert nuts, and two M3 x 8 mm screws.

Note: To use a 40-pin GPIO cable like this one

with the cooling system, you will need to insert a male female connector of this type

across the 40 pins of the board in order to mount the cooling system.