
Bộ vít và đai ốc M5 press-fit cho ngàm camera Raspberry Pi (Remix)
Remix of Giá đỡ camera Raspberry Pi khớp nối cho Prusa MK3 và MK2 By Sneaks
- Downloads
- 2
- Likes
- 0
- Views
- 45
- Remixes
- 0
- Comments
- 0
Files 6 5.7 MB
- M5_Nut_Smooth_-_4.0mm_1780965921.stlSTL · 654.2 KB
- M5_Screw_Knurled_4.0mm_1780965922.stlSTL · 1.2 MB
- M5_Screw_Knurled_5.0mm_1780965923.stlSTL · 1.2 MB
- M5_Nut_Smooth_-_5.0mm_1780965924.stlSTL · 654.2 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #400413
- Category
- Máy In 3D
- Published
Description
Here are the knurled cap for the screw and the smooth cap for the nut.
So I could see where the nut and the screw is.
I added "Hanging Holes", so it's now supportless.
There are some Parameter in VarSet.
But the only one that you really need is the Parameter Hex Lenght,
this change the deep from nut and the hexhead.
I testet it from 4mm to 5mm, in 0,2mm steps.
This is made for a 0,2mm layer, if you print with e.g. 0,15mm, change the
parameter in "Layer High".
Made with:
FreeCAD 1.1.1
PrusaSlicer 2.9.5
Filament: PETG
Nozzle: 0,4mm
Layer: 0,2mm
Infill: Gyroid 15%
Printer: Prusa MK4S
The Photos was made with a M5 x 22mm and a Hex Lenght with 4mm.
Print spec
- Formats
- 3mffcstdstl
- Model files
- 6
- Total size
- 5.7 MB
- Largest file
- 1.7 MB
0 comments
You may also like 12 models
See all-

-

-
New -
New -
New -

-

-

-

-

-

-


