Skip to main content
F3D
Lẫy nắp bình giữ nhiệt (Thermos lid latch) 1

8 images

Đồ Gia Dụng

Lẫy nắp bình giữ nhiệt (Thermos lid latch)

By mh_498145

Views
30

Files 1 868.5 KB

  • thermos-lid-latch_1780955811.3mf3MF · 868.5 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Some time ago I broke a lid latch in a random thermos that I used to often use; recently I've learned a bit of modeling, so I decided to fix it.

I have no idea what thermos it is, but if for some reason you've got a similar one, in addition to the 3D print you'll need:

  • 3 M2*8 self-tapping screws 

  • 4 mm high spring (I used the spring that was used in the original latch)

  • 24.5 mm by 1.7 mm rod to hold the latch to the lid (again, I salvaged it from the original latch)

  • (Optional) lithium grease - to put between the main latch body, and the slide used to lock the latch

Instructions:

After printing both parts (I'd suggest using a smooth PEI plate), use three M2*8 screws to attach the slide to the main latch body; make sure that screws are not too tight, or the slide won't be able to move.
The slide is slightly smaller than the main latch body, to make unlocking the lid easier.
I'd recommend putting a small dab of lithium grease between those two parts. 
Place the spring in the round cutout of the main body, that should match with a similar feature on a lid itself, and place the latch with a spring in the space, where the old latch used to be.
Attach the new latch, using the 24.5 mm by 1.7 mm rod, and you should be good to go

Read more Show less

Print spec

Formats
3mf
Model files
1
Total size
868.5 KB
Largest file
868.5 KB

0 comments

See all