Giá đỡ bộ sạc Steam Deck OLED

A charger organizer that fits perfectly in the Steam Deck carrying case. It fits near flat in the slot and also fits in the charger bag if you want to keep it enclosed.

There are 2 options. A Single piece one that requires organic supports on all the top overhang or the 3 Piece version that requires 4 M3x14mm screws

Print Settings (BOTH versions):

• Nozzle: 0.4mm

• Layer Height: 0.20mm

• Material: PETG

• Infill: 15%

• Perimeters: 2

• Supports: On build plate only (Organic)

ONLY for the 3 piece version below:

Print orientation:

• Place both Top wings on the large flat sides to avoid supports.

Hardware:

• 4 M3x14mm screws (only for the 2 part version)

Assembly:

• Remove supports from screw holes on the Body Bottom by pushing them with a screw or screwdriver through the top.

• Place 4 screws from the bottom of the base and screw into the top pieces on both sides.