
Hộp đựng DJI Mini 3 Pro có khóa cài
- Downloads
- 5
- Likes
- 0
- Views
- 69
- Remixes
- 0
- Comments
- 0
Files 3 609.6 KB
- Mini3Pro_Clasp_1780933514.stlSTL · 57.5 KB
- Mini3Pro_Lid_1780933515.stlSTL · 142.1 KB
- Mini3Pro_Box_1780933515.stlSTL · 410 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #399614
- Category
- DIY
- Published
Description
Custom-fit protective case for the DJI Mini 3 Pro. Designed to store and transport your Mini 3 Pro folded up with a battery installed—no more props flopping loose or digging the drone out of a foam brick every time you want to fly. Fold it, drop it in, grab and go.
This uses the same printed box + lid + clasp system as my GEPRC Darkstar 22 and Cinelog 30 v3 cases, so if you've printed either of those, you already know how it goes together.
⚠ Always store the drone with the gimbal protector on. Inside this case the drone rests on its camera, and the Mini 3 Pro gimbal is delicate—leaving it bare against the case is asking for trouble. Clip the factory gimbal guard on before the drone goes in. Every single time.
Features
-
Folded-fit design – Holds the Mini 3 Pro with the arms folded and a battery installed
-
Secure clasp system – Printed clasp locks the lid down with two M3 x 16mm bolts for a snug, rattle-free closure
-
Part of the family – Matches the look and hardware of my Darkstar 22 and Cinelog 30 v3 cases
Print Settings
-
Material: PETG recommended for durability and a little flex
-
Supports: Shouldn't be needed for this one.
-
Layer Height: 0.3mm for all parts
Hardware Needed
- 2× M3 x 16mm bolts (for the lid clasp)
Reminder
- Gimbal protector ON before it goes in the case. Worth saying twice.
Print spec
- Formats
- stl
- Model files
- 3
- Total size
- 609.6 KB
- Largest file
- 410 KB
0 comments
You may also like 12 models
See all-
New -

-

-

-

-

-

-

-
New -

-
New -


