
Bộ Chuyển Đổi Pump Action Cho Dart Zone/Adventure Force Brute Pro
Remix of Nòng súng Adventure Force Brute Pro lấy cảm hứng từ Peacemaker By ASHPrinting_3472237
- Downloads
- 9
- Likes
- 2
- Views
- 90
- Remixes
- 0
- Comments
- 0
Files 4 234.7 KB
- Pump_Grip_1780744298.stlSTL · 63 KB
- Pump_Bar_1780744299.stlSTL · 26.5 KB
- Barrel_Extension_1780744299.stlSTL · 118.6 KB
- Pump_Bar_2_1780744300.stlSTL · 26.5 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #399093
- Category
- Đồ Chơi Ngoài Trời
- Published
Description
I felt the top prime on the brute pro was a little stiff so I pump converted it. Requires 4 m3x10 to secure the pump bars to the priming grip, and 2 m3x6 screws for barrel retention. Screwing the priming bars into the PT and the barrel extension into the front reuse the same toy screws that come with the blaster. Screws attaching pump bars to the PT can be replaced with M3x8 screws if you strip the screw holes like I did. Turns the brute pro into a really nice short prime 150 fps MIG blaster. Prime is much more managable as a pump prime than a top prime.
Print priming bars with 99 walls, everything else can be printed with standard settings. I used 4 walls 15 infill.
Print spec
- Formats
- stl
- Model files
- 4
- Total size
- 234.7 KB
- Largest file
- 118.6 KB











