
Khuôn Đúc Cột Trụ Bồn Tắm Chim (Bird Bath Pillar)
- Downloads
- 3
- Likes
- 1
- Views
- 81
- Remixes
- 0
- Comments
- 0
Files 9 24.5 MB
- base_section_1780686176.stlSTL · 16.5 MB
- upper_clip_1780686177.stlSTL · 35.2 KB
- mid_section_1780686178.stlSTL · 1.5 MB
- lower_clip_1780686179.stlSTL · 38 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #397540
- Category
- Đồ Gia Dụng
- Published
Description
This is a mold I made to create a concrete pillar / base for a bird bath I made.
Print in PLA as this behaves the best to keep its shape for these larger tall thin pieces. I got the cheapest decent PLA off Amazon. Overture PLA 1KG spools x 2 for $24. Used about 1 1/3 spools.
Printed with two walls and gyroid infill. Structural profile. Speed may produce a lot of artifacts with these large thin pieces which may carry across into the concrete.
Supports are needed only for the middle piece.
The bottom section at the top in this image has a built in support. This is a separate piece in the STL. If you don't wish to use it and just want to paint on supports you can split the object and remove it. I designed it for an easy removal. I used this support to add stability for printing since it's a bit top heavy.
I used 3/4" 10/24 screws to assemble this.
The holes are 4.7mm.
I painted the inside with peanut oil before assembly. This helps the concrete release easily from the form.
For the concrete mix, I used:
3 parts Quikcrete Play sand
1 part Quickrete Portland cement
YouTube has some great videos on mixing concrete.
I added a few lengths of wire down the middle to act as rebar for durability.
Once you take it out of the mold, you can paint on a loose slurry of pure Portland concrete to fill in the holes and the like if you wish. There's good guidance out there on the how to pour and cure your creation for the best success.
For the bird bath I used this saucer to mold on top of with the pieces included in the bird bath folder.
Print spec
- Formats
- stl
- Model files
- 9
- Total size
- 24.5 MB
- Largest file
- 16.5 MB
0 comments
You may also like 12 models
See all-

-

-

-

-

-

-

-

-

-
New -

-
New

