Giá đỡ đồng hồ (Watch Holder)

Product Description

This is a watch holder designed for round-dial watches up to 45 mm in diameter. It features a practical design for easy placement and removal of the watch, making it suitable for everyday use. Thanks to the elevated base and the concave watch-supporting surface, there is no need to open or fasten the watch strap. You can simply place your watch on the holder with ease.

The design of this watch holder has been optimized to reduce filament and material consumption while maintaining sufficient strength to reliably support the weight of the watch.

Specifications

• Watch resting diameter: 45 mm

• Watch resting depth: 6 mm

• Maximum width: 75 mm

• Maximum length: 85 mm

• Maximum height: 105 mm

• Approximate height from the watch resting position: 75 mm

Assembly Instructions

For easier printing and reduced material usage, this watch holder has been designed in two separate parts: Head and Feet.

To simplify assembly, two alignment pins are integrated into the base, while two matching holes are provided on the head section. After printing, the two parts can be easily joined using an appropriate adhesive.

If desired, the underside of the holder can be secured to a desk or shelf using double-sided adhesive tape.

Printing Recommendations

I printed this watch holder using ABS filament with 20% infill, and it appears that a lower infill value, such as 10–15%, should also be sufficient without compromising functionality.

A Wall Line Count of 2 to 4 walls is generally adequate for this design.

For an improved appearance, the printed holder can be further enhanced through sanding, post-processing, and painting.

Support

If you have any questions, suggestions, or encounter any issues, please feel free to contact me via the email address listed in my profile or through the platform's messaging system.

Thank you for your support and interest in this project.

Wishing for a brighter world and a freer Iran.