Đĩa Lưỡi Cắt 7 Lưỡi Cho Robot Cắt Cỏ Eufy E18 / E15 / TerraMow

Fits:

Tested on: Eufy E18
Should Fit: Eufy E15 E18, TerraMow V600, V1000, S800 S1200

Hardware Needed:

• M4x6x6 Heat set brass threaded inserts

• Replacement blades that include screws w/ shoulder

• ASA Filament (or something outdoor-worthy)

Tools Needed:

• Screwdriver

• Soldering Iron (or something hot to set the threaded inserts)

Instructions:

1. Print flat side down. Use supports inside the 3 middle holes. Don't use supports on the outside ones if possible

2. Unscrew the 3 screws from the center of the original disc & remove

3. After pulling our supports, use a soldering iron to carefully set threaded inserts into each hole.

4. Screw the new disc onto the mower and install blades, ensuring the blades swing freely on the shoulder of the screw.