Keychron M4 - Bản Mod Hex Light

This is an original Mod of the Keychron M4 Fingertip mouse with a width of around 51mm and the print weighs around 12 grams. I found the grip of the original M4 a bit too narrow because of the curve in shape. this design widens the sides and reduces the weight of the mouse.

Notes: 

• It uses the PCB mounting screws in the m4 for the clicks and no screws for the pcb but i have provided 3mf and step files to modify to your liking. 

• The ideal printing of the clicks is flat and can be curved to liking using some heat, thought im not too sure if you can do this printing using petg or other materials. I Personally have mine mostly flat and some curve around the very tips. This also makes the clicks texture side up, so use a plate with the surface you prefer clicking on.

• The side buttons uses quite a bit of supports because of the raised tip, try to print it somewhat flat to prevent snapping it.

• There are 4 dot skate points at the bottom, you can add more below on some points.

• You may need to sand down some parts.