Bộ đồ chơi lắp ráp thú vị

Build something or anything with bolts and nuts and wheels and pins and cubes.

Build a christmas-present :-)

Print instructions

HurKulSomHelst

File

Comment

Cube.stl

A cube without any link

Cube Link.stl

A cube with 4-corner pins

Cube Link B.stl

A cube with 4-middle pins

Cube Link C.stl

A cube with one center pin

Cube Triangle.stl

A cube, cut diagonal

Link.stl

Short link

Link Medium.stl

Medium sized link

Link Medium B.stl

Medium sized link, both ends

Link Lid Medium B.stl

A "lid" for Link Medium B

Link Long.stl

Long link

Link Long B.stl

Long link, both ends

Link Lid Long B.stl

A "lid" for Link Long B

M4_5 Bolt 14mm.stl

Bolt 4.5mm, in sizes 14,24,34,44,54,64,74,84 mm

M4_5 Nut Scale to 107.8.stl

Nut to 4.5mm bolt, scale to 107.8% in slicer

M8 Bolt 15mm.stl

Bolt 8mm, in sizes 15,25,35,45,55,65,75,85 mm

M8 Nut Scale to 106.stl

Nut to 8mm bolt, scale to 106% in slicer

Stick 2.stl

Stick, comes in 2,3,4,5,6,7,8 sections

Wheel 50mm.stl

Wheel for 8mm bolt or pin, suggested use with 30mm wheel

Wheel 40mm.stl

Wheel for 8mm bolt or pin, suggested use with 22mm wheel

Wheel Pin Big.stl

Pin to big wheels *2)

Wheel Pin Small.stl

Pin to small wheels *2)

Fast nyckel 13mm v1.stl

A tool for the bolts and nuts of course :-) *1)

Notes

*1) For 7.5mm key (the M4.5), scale it to 57.7% in the slicer, that is for X, Y and Z

*2) Can be very tight, but when on the wheel the wheel should spin free

Compatible with
https://www.prusaprinters.org/prints/40925-raspberry-pi-case-for-camera-with-flexible-stand

More Notes

I have experienced that different filaments have different properties. Sometimes the pins fits the holes, sometimes to tight and sometimes to loose. You have to try yourself. if it wont fit in one way it may fit in another. You may have to "exercise" the parts. Anyway, Have fun!