Skip to main content
F3D
Giá đỡ điện thoại cho Samsung Galaxy S4 chạy Octo4A 1

3 images

Máy In 3D

Giá đỡ điện thoại cho Samsung Galaxy S4 chạy Octo4A

By FreaK_851721

Downloads
58
Likes
12
Views
757
Remixes
1
Comments
3

Files 10 34.4 MB

  • octo4a-stand-samsung-s4-stand_0.2mm_PLA_MK3SMMU2S_2h57m_1766227316.gcodeGCODE · 3 MB
  • octo4a-stand_0.2mm_PLA_MK3SMMU2S_12h22m_1766227317.gcodeGCODE · 30.6 MB
  • octo4a-stand-base_1766227309.stlSTL · 20.1 KB
  • octo4a-stand-extension-stick-bottom_1766227310.stlSTL · 4.6 KB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 1

See all 1 remix

Description

An adjustable side mount for the Samsung Galaxy S4. It helps you to hold the phone that is running Octo4A. You can track the process with the cam or create a timelapse of your print. I specially made the design for Samsung Galaxy S4 but I believe, the same dimension phones will not create any fitting problems. On the other hand, I made the design using SketchUp and uploaded the holder's .skp file. So you can make the changes for your own desires.

I've used PLA+ filament. The PLA filament was too brittle. It was cracking when assembling the parts. Also, the printer was creating a very smooth and precise output with PLA+ filament.

You do not need any screws or external tools for the assembly. Everything is just interlocking each other.

I also advise you to use 100% infill for axis parts. For the rest, 40% infill is more than enough.

You can print the extension-top part as much as you want to make the distance longer/higher.

I'll be more than happy to help if you have any questions.

Summary

  • The holder is for Samsung Galaxy S4
  • The base is for Prusa i3 MK3S+
  • Use PLA+ for robust output
  • Use 100% infill for axis parts

Read more Show less

Print spec

Formats
gcodeskpstl
Model files
10
Total size
34.4 MB
Largest file
30.6 MB

3 comments

See all