
Cục chặn cửa thông minh tự đổ bê tông
- Downloads
- 2
- Likes
- 0
- Views
- 60
- Remixes
- 0
- Comments
- 0
Files 7 49.5 MB
- door_weight_bushing_1780152545.stlSTL · 246.2 KB
- door_weight_clip_1780152546.stlSTL · 297 KB
- door_weight_pin_1780152547.stlSTL · 1.8 MB
- door_weight_1780152548.stlSTL · 36.3 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #390250
- Category
- Đồ Gia Dụng
- Published
Description
Long story short. This project came alive because I wanted to use one of these truss pins I had from work and a bag of cement that I have for years with no use for it. With another heatwave I am spending more time in the garden and keeping the door fully open to get some air in the house can be difficult when it gets windy so I thought lets make a door stop unlike my other door stopper that keeps the door open just partially:
Anyways to the door stop itself I printed it in mixture of PETG and PLA it does not really matter. I used like 3 perimeters on parts I printer with 0.6mm nozzle and 4 perimeters on parts printed with 0.4mm one and everything seems sturdy enough for the weight I just used some cement and mixed it directly inside the receptacle but can just use sand or bearing or whatever heavy offcuts you have cutting about the shop.
Also I printed mine with no supports.
I was going to use some left over rubber feet from old printer or something but decided not to use them in the end so I modelled a little ones you can print and glue in if you desire that but I haven't even bothered myself
Print spec
- Formats
- stl
- Model files
- 7
- Total size
- 49.5 MB
- Largest file
- 36.3 MB
0 comments
You may also like 12 models
See all-

-

-

-
New -

-

-

-

-

-
New -

-
New

