Skip to main content
F3D
Q2 Filament Entry Sensor D2F - Phiên bản dùng metal collet 1

9 images

Máy In 3D

Q2 Filament Entry Sensor D2F - Phiên bản dùng metal collet

Remix of Sensor vào filament Q2 D2F (Model cập nhật) By DM_2737224

By weav_247761

Downloads
1
Views
46

Files 3 223.5 KB

  • Brass_Insert_Tool_-_Top_1780086082.stlSTL · 41.5 KB
  • Brass_Insert_Tool_-_Bottom_1780086083.stlSTL · 66 KB
  • q2_entry_sensor_-_spinfree_metal_collet_1780086084.stepSTEP · 116 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Just a small revision to the excellent filament sensor model by 53Aries and updated by Spunguh.  I used a metal collet insert from E3D to finally fix the issue of the ECAS teeth cutting the tube.  Collet rotates freely with the PTFE so no more tube failures - hopefully!

The collet insert I used from KB3D:

https://kb-3d.com/store/extruders-hotends/39-e3d-embedded-bowden-coupling-for-metal-175mm-1644688734926.html

*NOTE:  MAKE SURE YOU POST-PROCESS THE MODEL BY USING A RAT-TAIL NEEDLE FILE AS DESCRIBED IN SPUNGUH'S MODEL POSTING BEFORE YOU INSTALL THE BRASS INSERT!!!

Pictures annotated and pretty self-explanatory.  Have had no issues with tube getting cut-off with this version.  I used tight tolerances to ensure a good press-fit.  STEP is provided if you need to loosen the tolerance a bit (but if your printer is well calibrated should not be an issue).  Not sure about filled filaments as used non-filled PC-blend for the prototype. 

Happy Printing!

Read more Show less

Print spec

Formats
stepstl
Model files
3
Total size
223.5 KB
Largest file
116 KB

0 comments

See all