Skip to main content
F3D
Miếng đệm Mijing T23 hỗ trợ bo mạch THT 1

1 image

DIY

Miếng đệm Mijing T23 hỗ trợ bo mạch THT

By ksuszka_192195

Views
58

Files 2 23.4 KB

  • mijing_t23_pcb_holder_spring_clamp_spacer_1780036462.stlSTL · 11 KB
  • mijing_t23_pcb_holder_back_clamp_spacer_1780036463.stlSTL · 12.4 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Mijing T23 PCB vise and its various variants is very nice for SMD boards but it has not enough vertical clearing for THT components. Here are some simple spacers which rises board additional 15mm over the original clearing.

For each clamp you need a spacer and two M2.5x20 screws.

I used standard Philips screws but I filed down their head diameter so they fit inside original holes. I put each screw into a rotary tool chuck, run it with the lowest speed and moved it against a file a few times and it did a trick.

If you want to have an additional clearance you can use M2.5x25 or M2.5x30 screws and scale spacers only in Z axis. Spacers are 15mm height for the 20mm screw, so for the 25mm screw you need to scale it by 20/15=133% and for the 30mm screw you need to scale it by 25/15=167%.

Read more Show less

Print spec

Formats
stl
Model files
2
Total size
23.4 KB
Largest file
12.4 KB

0 comments

See all