Hệ thống trưng bày Funko Pop! Wall Hex Modular v2

### Overview

This is a newer version of my [previous design](https://www.thingiverse.com/thing:6719204).

The goal was to hide the joints between the wall hexes for a much cleaner finish.

This version requires printing the joints separately — a bit more work to set up, but the results speak for themselves.

---

### Assembly Recommendations

- Print shelves ahead of time and assemble everything before mounting on the wall.

- Joint tolerances are tuned for a middle ground — they may feel slightly tight or loose depending on filament used.

- Recommended method:

1. Insert 3 joints into one hex.

2. Place on a flat surface (floor, desk, etc.).

3. Press another hex into the joints.

- Once joined, nothing will feel loose.

- If you want an easier build with fewer parts, try the [previous version](https://www.thingiverse.com/thing:6719204).

---

### Design Intent

These displays are inspired by other designs I’ve seen online, but I wanted:

- A sleeker look

- Less filament usage

- Stronger connections

- More modular system

---

### Various Inspirations

- [Funko Pop Locking Wall Shelf w/ Display (Etsy)](https://www.etsy.com/listing/1489423246/funko-pop-locking-wall-shelf-w-display?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=pop+funko+display&ref=sr_gallery-1-6&bes=1&sts=1&content_source=52b3bad9afd5d9a89f5bc9e57a8ad01755c53d74%253A1489423246&search_preloaded_img=1&organic_search_click=1)

- [Funko Pop Shelf / Display (Etsy)](https://www.etsy.com/listing/1262669917/funko-pop-shelf-funko-pop-display?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=pop+funko+display&ref=sr_gallery-1-19&pro=1&cns=1&sts=1&content_source=bb5048cd4f1cffc933f6f8102d7a395192ffdfba%253A1262669917&search_preloaded_img=1&organic_search_click=1)

- [Funko Pop & Collectable Figure Shelf (Etsy)](https://www.etsy.com/listing/1653426603/funko-pop-and-collectable-figure-shelf?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=pop+funko+display&ref=sc_gallery-2-11&search_preloaded_img=1&plkey=02e3b6fd6237a00dc9bb1286b131de5b08859d40%3A1653426603)

- [Thingiverse: Modular Shelf System](https://www.thingiverse.com/thing:4719814)

- [Thingiverse: Funko Pop Display](https://www.thingiverse.com/thing:6006934)

---

### Notable Changes

- 3 T-slot joints at each connection (instead of 2)

- Filleted edges

- Shelf has:

- Hexagonal shape

- Hexagonal texture for figure grip

- Subtle lip to prevent figures from falling

- Optimized joints for faster printing and less filament but still strong

---

### Specifications

- Designed for standard 4" tall Funko Pops

- Interlocks to form any desired arrangement

- Mounts via a small hole in the corner (expandable with a drill if needed)

- Prints flat on the bed — no supports needed (except for some corner variants)

- Best when used with multiple hexes — won’t hang level as a single unit

---

### Corner & Shelf Variants

- NoShelf version available

- Corner transition options for 90° wall turns:

- Corner_NoShelf – One-piece print, requires supports

- Corner_Split_Sym_NoShelf – Two mirrored pieces, no supports, joined with L-joints. Print 2

- Requires 1 set of L-joints

- Corner with Shelf variants:

- Corner_Shelf – One-piece print, requires supports

- Corner_Split_L/R_Shelf – Two mirrored pieces, no supports, joined with L-joints. Print both

- Requires 2 sets of L-joints

- Fits some (but not all) Funko Pops due to smaller shelf space

---

### Changelog

8/13/25

- Added NoShelf hex

- Added Corner and Corner_Split versions

- Introduced L-joints for corner connections

8/14/25

- Added Corner_Shelf and Corner_Split_L/R_Shelf

- Shelf versions require 2 sets of L-joints

- Updated Edge design from previous system to match new version

8/15/25

- Added ShelfOnly

- Meant for top shelf only if there is no space for hex

- Idea inspired by [this remix on Thingiverse](https://www.thingiverse.com/thing:6899727).

- Added Shelf_2Hole

8/18/25

- Added Corner_Edge variants

- 4 different files for every different scenario

- T-joints need to be inserted while in position due to its shape

- Added Shelf_Only variants

- 3 additional files for every different scenario

- Shelf_only while in a dip needs to be installed after edges