
Robot Chiến Đấu Antweight 1lb
Remix of Robot Chiến Đấu Antweight Foam Spinner (Vertical Spinner) 150g By JamesGreen_3608732
- Downloads
- 1
- Likes
- 1
- Views
- 64
- Remixes
- 0
- Comments
- 0
Files 5 6 MB
- Plastic_Gear_fo_-Foam-_Combat_Robot_large_v3_32T_1779991727.stlSTL · 5.5 MB
- Plastic_Top_for_-Foam-_Combat_Robot_v4_1779991728.stlSTL · 151.8 KB
- Steel_Weapon_Mount_for_-Foam-_Combat_Robot_v11_1779991729.stlSTL · 137 KB
- Steel_Weapon_for_-Foam-_Combat_Robot_v10_1779991730.stlSTL · 132.1 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #387992
- Category
- DIY
- Published
- License
- GNU General Public License v3.0
- Tags
Description
THIS COMBAT ROBOT IS STILL IN PROGRESS, ALL FILES ARE NOT FINAL! I HAVE NOT FINISHED DESIGNING IT! IF SOMETHING DOES NOW WORK, PLEASE COMMENT AND TELL ME WHAT IS WRONG, I WILL TRY TO FIX IT! THANK YOU!
I recommend printing the chassis in 100% infill tpu, and machine the Weapon and Weapon mounts out of steel, after that, if you still are enough underweight, I would say you should also machine the top plate out of steel, but if you will be overweight with a top plate made of steel, then I would print the top plate out of tpu, if you are still somehow over weight, you should use Super PLA+ for the weapon mounts, instead of Steel or tpu. If you cannot machine steel, and are just looking to make a 1lb Plastic Antweight, you can print the weapon and weapon mounts out of 100% infill Super PLA+, and if you are competing, and the competition allows it, print the main body and top out of 100% infill TPU, if the competition does not allow it, just use 100% infill Super PLA+. The top plate uses M2 screws, and the rest of the robot uses M3 screws.
Parts:
-
2 n10 600-1650 RPM motors: https://turnabot.com/products/high-power-n10?variant=40166099779649
-
Various length M3 screws
-
XT-30 connectors: https://itgresa.com/product/xt30u-connector-only-male-female-pairs/
-
JST connector male: https://palmbeachbots.com/products/jst-connector-male?srsltid=AfmBOoqG9rWNNwYVtFKPkIFK5aMf7Z9w7FW1fZpcTSJPodUgyExkE0RX
-
5/16" Bolt and Nut
-
Palm Power 3S 180mAh Gen2 45C Lipo Battery: https://palmbeachbots.com/products/palm-power-3s-180mah-45c-lipo-battery
-
Super PLA+: https://overture3d.com/products/overture-super-pla-3d-printer-filament-1-75mm?variant=43982582415614 (only if necessary)
Print spec
- Formats
- stl
- Model files
- 5
- Total size
- 6 MB
- Largest file
- 5.5 MB
0 comments
You may also like 12 models
See all-
New -

-

-

-

-

-
New -
New -

-

-
New -


