
Vỏ case cho bo mạch phát triển Wi-Fi Flipper Zero cơ bản
- Downloads
- 212
- Likes
- 19
- Views
- 1,442
- Remixes
- 0
- Comments
- 1
Files 6 851.5 KB
- Flipper_Zero_WiFi_Dev_Board_Case_Top_1766467747.3mf3MF · 58.8 KB
- Flipper_Zero_WiFi_Dev_Board_Case_Bottom_1766467747.3mf3MF · 98.1 KB
- Flipper_Zero_WiFi_Dev_Board_Case_Top_Closed_1766467748.3mf3MF · 59.2 KB
- Flipper_Zero_WiFi_Dev_Board_Case_Top_Closed_1766467749.stlSTL · 184.8 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #38779
- Category
- Dụng Cụ Tiện Ích
- Published
Description
This print is specifically designed for the basic WiFi board straight out of the box, omitting features such as the antenna and SD card slot.
This creation is a remix of magdong's Wi-Fi Dev Board Case (https://www.thingiverse.com/thing:5564906).
For secure assembly, utilize 4 x M3x12mm screws accompanied by 4 x M3 nuts.
This design also has a pin protector boot cover that can be found in the following locations:
- https://www.printables.com/model/606861
- https://www.thingiverse.com/thing:6104552
- https://github.com/CodyTolene/3D-Printing/tree/main/Flipper%20Zero%20-%20WiFi%20Dev%20Board%20Case%20Boot%20Cover
My print settings:
- Hatchbox PLA
- 0.2mm layer height
- 0.4mm nozzle (line width)
- Enable retraction
- Wall count 3 (+ print thin walls enabled)
- Top/bottom layers: 4
- Infill density: 20%
- Infill pattern: Cubic
- Print temp 200 C
- Bed temp 60 C
- No supports needed
See more designs on my GitHub here: https://github.com/CodyTolene/3D-Printing
Print spec
- Formats
- 3mfstl
- Model files
- 6
- Total size
- 851.5 KB
- Largest file
- 276.7 KB
1 comment
You may also like 12 models
See all-

-

-
New -

-

-

-

-

-
New -
New -

-
New

