Case Tiny Heltec T096 cho pin 3000mAh (103665)

I've been using the Heltec T114 with the great 3000 mAh case from Printables, and I really loved that  design format

https://www.printables.com/model/1451567-heltec-t114-3000-mah

However, I ran into two problems:

1. The case was still a bit too large for my liking.

2. No equivalent case existed for my Heltec T096.

So, I decided to design my own, tailored exactly to my needs. This case is made for a 103665 3000mAh battery and a flexible antenna, resulting in truly miniature dimensions: 4cm x 7cm x 2.4cm.

I’m thrilled that I managed to make the case both robust and convenient. The buttons have a really satisfying click and work perfectly.

Friends, I’m very happy to be able to share this with you. I’m also sharing my joy about another device I’ve created for maintaining a small current draw on power banks. With it, you can power any node without a battery, and the power bank won’t shut off—it will keep your node running until it’s completely drained. Please take a look at powerhelper.ru. I’d be delighted if someone shares my excitement about this device; I made it for you, just like this case!

Printing recommendation: I suggest using PETG filament.