Bảng hiệu Pro Trump #1

Pro Trump Sign #1

Wall-mounted sign designed as a remix variation of the original design.

To get the letters to be a different color than the sign itself, set up pauses for filament changes in the .gcode file for the sign at Z = 13 (to change for black letters in the image) and again at Z = 15.2 (for red letters).

See your printer or slicer documentation for how filament changes are handled on your machine.

Use part "Hole Test" to make sure your printer prints the slot the correct size for the screw head to be inserted and then slide into the thinner part of the slot.

Mount to a wall using four #8 x 1" wood screws.

Use "Screw Guide Tool" to locate screw holes in your wall. Level the perimeter of the tool before screwing screws into the wall. Screw screws into the wall until the countersunk head almost touches the wall surface (after the tool is removed). This will leave enough of the screw exposed to fit into the four slots on the back of the sign.

If hung outdoors, remember to spray with a clear, non-water-based paint to help waterproof it.

I was able to print this on a Creality K2 at 100% scale with no resizing required.

(.3mf file included for reference)