
Bảng Anti Trump Sign #1
- Downloads
- 40
- Likes
- 54
- Views
- 466
- Remixes
- 1
- Comments
- 0
Files 5 2.4 MB
- Screw_Guide_Tool_1778881708.stlSTL · 172.2 KB
- Hole_Test_1778881709.stlSTL · 70 KB
- Anti-Trump_Sign_1_1778881710.stlSTL · 1.7 MB
- Anti-Trump_Sign_1_1778881710.3mf3MF · 406.6 KB
Make a variant with AI
Build another version of this model.
Remix versions 1
See all 1 remixDetails
- Model ID
- #386127
- Category
- Mỹ Thuật
- Published
Description
To get the letters to be a different color that the sign itself, set up pauses for filament change in the .gcode file for the sign at Z = 13 (to change for black letters in the image) and again at Z = 15.2 (for red letters).
See "How to change colors.pdf" for how this is done on an Ender-3 (your printer may require a different code.
Use part "Hole Test" to make sure your printer prints the slot the correct size for screw head to be inserted and then to slide into the thinner part of the slot.
Mount to a wall, using four #8 x 1" wood screws. Use "Screw Guide Tool" to locate screw holes in your wall. Level the perimeter of the tool before screwing screws into wall. Screw screws into the wall until countersunk head almost touches wall surface (after tool is removed). This will leave enough of the screw exposed to fit into the four slots on the back of the sign.
If hung outdoors, remember to spray with a clear, non-water based paint to waterproof it!
I was able to print this on an Ender-3 V3 Plus printer at 100% scale by centering the part at 154 in X and 148 in Y. (.3mf file included for reference).
Print spec
- Formats
- 3mfpdfstl
- Model files
- 5
- Total size
- 2.4 MB
- Largest file
- 1.7 MB
0 comments
You may also like 12 models
See all-

-

-
New -

-

-

-

-

-

-

-

-



