
Tấm Calibration Đai Ốc Lục Giác (Hex Nut Calibration Plate)
- Downloads
- 19
- Likes
- 2
- Views
- 110
- Remixes
- 0
- Comments
- 0
Files 3 1.5 MB
- hex_calibration_plate_1778884542.stlSTL · 428.2 KB
- hex_calibration_plate_with_bit_support_1778884543.stlSTL · 502.6 KB
- expanded_hex_calibration_plate_1778884544.stlSTL · 571.8 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #386565
- Category
- Máy In 3D
- Published
- License
- Creative Commons — Attribution
Description
This is a 4mm thick hex nut calibration plate, helping you size hex nuts, shafts and other hexagonally-shaped fasteners with a tolerance of ±1mm either way. It covers common metric sizes: M3, M4, M5, M6, M8 and M10.
The millimeter measurement on the left refers to distance between the flats. This means you need to adjust it for your CAD system. For example, if you are using OpenSCAD, to get the radius of a cylinder (with $fn=6), you take this value and divide it by sqrt(3).
There are three variations of this model:
-
Ordinary plate for common metric hex nuts (excudes m7 and m9)
-
Same as previous but also covers standard 1/4" hex (Allen) bits
-
Same as previous but with ±2mm tolerance
Printing settings: 30% infill, 3 perimeters.
Print spec
- Formats
- stl
- Model files
- 3
- Total size
- 1.5 MB
- Largest file
- 571.8 KB
0 comments
You may also like 12 models
See all-

-

-

-

-

-

-

-

-

-

-

-
New
