Đồ gá chống xệ: phiên bản dùng insert nut

Since the thread for the metal strap mounting does not seem to hold properly (despite the greatest care), and because I don’t like using glue (as it makes the part non-removable), I prepared a clean version using an insert nut.

You will need:

• 1 x M3 insert nut (I used a M3x5.7x4.6)

• 1 x screw M3x10

Printing instructions:

• PETG or ABS recommended

• 0.2 mm layer height

• 2 walls

• 25% infill

Please see the original model for print and assembly instructions and the bill of material.