Skip to main content
F3D
Giá đỡ bearing tối ưu cho Sovol SH03 1

1 image

Máy In 3D

Giá đỡ bearing tối ưu cho Sovol SH03

By KrakenUp

Downloads
1
Views
42

Files 2 59.8 KB

  • Lager_f_r_Boden_V3_1778699218.stepSTEP · 39.6 KB
  • Spulenf_hrung_Ecke-K_rper_1778699218.stepSTEP · 20.2 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

The original spool holder design creates noticeable resistance due to the position of the roller bearings. This puts additional load on both the extruder and the filament during printing, which can lead to inconsistent material flow.

These models relocate the ball bearings and rollers to the bottom. This improves force distribution, reduces resistance, and results in a smoother, more reliable filament feed.

The spool still requires guidance — the guides are installed at the front, centered.

All parts were printed in ASA. Simply duplicate and mirror the bearing holder and the spool guide in your slicer, then print as many units as needed.

The existing ball bearings and rollers can be reused.

Since space inside the dry box is limited and proper air circulation is important, I intentionally did not use spacers.

STEP files are included for easy customization.

Read more Show less

Print spec

Formats
step
Model files
2
Total size
59.8 KB
Largest file
39.6 KB

0 comments

See all