
Reveni Spotmeter Mk2 - Adapter IR-Cut Filter & Lens Hood
- Downloads
- 0
- Likes
- 0
- Views
- 44
- Remixes
- 0
- Comments
- 0
Files 1 243.5 KB
- filter_holder_and_hood_1778671960.stlSTL · 243.5 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #383421
- Category
- Dụng Cụ Tiện Ích
- Published
- License
- Creative Commons — Attribution
Description
The Reveni Labs Spotmeter Mk2 has sensitivity to infrared light, which causes inaccurate readings on IR-reflecting subjects like vegetation. When comparing it to a standard digital camera, the Mk2 can underexpose grass or foliage by 1 to 1.5 stops.
To fix this, I designed this IR-Cut filter holder that includes a built-in lens hood to prevent sun flares on the glass. It is designed to fit a filter that is 10 mm in diameter and 0.55 mm thick, though similar thicknesses should also work fine.
While the press fit holds relatively well on its own (notch at the bottom) , I added a tiny drop of flexible adhesive (like T-7000 glue) to keep it fully secure while still being easy to remove later if needed.
Because the filter slightly reduces overall light transmission, you will need to adjust the meter's calibration in the settings. For reference, my factory calibration was set to +0.1 EV, and I adjusted it to +0.4 EV to compensate once the filter was installed.
Print spec
- Formats
- stl
- Model files
- 1
- Total size
- 243.5 KB
- Largest file
- 243.5 KB
0 comments
You may also like 12 models
See all-
New -

-

-

-

-
New -

-

-

-

-

-


