Skip to main content
F3D
Nắp Che Cọc Điện Dyness DL5.0C (Dyness DL5.0C Terminal Cap) 1

5 images

DIY

Nắp Che Cọc Điện Dyness DL5.0C (Dyness DL5.0C Terminal Cap)

By BryceArkos

Views
35

Files 2 336.5 KB

  • Dyness_DL5.0C_Terminal_Cap_1778671640.stlSTL · 260 KB
  • Dyness_DL5.0C_Terminal_Cap_3mf_1778671641.3mf3MF · 76.5 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Print Instructions & Recommended Settings: This print profile is pre-configured to print the model upside down. This is the recommended orientation, as it significantly reduces the amount of support material needed (making post-processing easier) and produces a perfect, flat top surface for the final part.

  • Printing Orientation: Upside down (top face down on the build plate).

  • Material: PETG (highly recommended for heat resistance on power terminals). ABS/ASA are also suitable. PLA is NOT recommended.

  • Layer Height: 0.2mm Standard.

  • Walls/Perimeters: 3 or 4 (for robust construction around screw threads and cable arches).

  • Infill: 20-25% Gyroid or Grid.

  • Supports: Required (normal or tree). Minimal tree supports are usually easiest to remove from the central hole when printed upside down.

Read more Show less

Print spec

Formats
3mfstl
Model files
2
Total size
336.5 KB
Largest file
260 KB

0 comments

See all