Skip to main content
F3D
Chuông gió Tubulum - Độc đáo như Blue Man Group 1

1 image

Sự Kiện - Lễ Hội

Chuông gió Tubulum - Độc đáo như Blue Man Group

By dyladan_489249

Downloads
2
Likes
2
Views
95

Files 5 291.1 KB

  • 2x_Frame_1778634906.stlSTL · 117.5 KB
  • 6x_Collar_1778634907.stlSTL · 19.3 KB
  • 6x_Flapper_1778634908.stlSTL · 30.4 KB
  • 6x_Pad_1778634909.stlSTL · 12.6 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#382337
Published

Description

Inspired by the Blue Man Group Tubulum instrument, this windchime uses varying lengths of PVC pipe to produce musical notes. 

It's simple, grab some fishing line, your 3D printer, 6-screws, epoxy, and some spare time. All parts are meant to be friction fit (except for the flappers).

Print order:

  • 2x Frame

  • 6x Collars

  • 6x Flaps

  • 6x Pads (print with TPU)

  • 1x Windcatcher

  • While parts are printing, run to hardware store and buy two 1-inch by 72-inch white PVC pipes. (~$5USD/Each)

Tube Lengths:

  • C4 (261 Hz): ~24-25 inches

  • D4 (293 Hz): ~22 inches

  • E4 (329 Hz): ~20 inches

  • F4 (349 Hz): ~19 inches

  • G4 (392 Hz): ~17 inches

  • A4 (440 Hz): ~15 inches

Assembly:

  • Insert cut tubes into frame top.

    • Top of pipes should be ~30mm above the frame

    • NOTE: All tubes shoule be level on the top

  • Insert tubes into bottom frame.

    • Bottom of shortest tube should be ~30mm below the frame
  • Glue one pad to the indented area of each flapper.

  • Install a collar on top of each tube

    • Install a flapper on top of each collar and secure with a screw

    • NOTE: Make sure flapper can move freely.

  • Tie one strand of fishing line to each flapper and thread each line down the small holes in the top and bottom frames.

  • Tie all fishing lines together and secure to the windcatcher.

  • Secure an eye hook into the top frame and hang in windy area.

Please note: This is only theory right now. My only working printer is busy and I have not had a chance to test any of this.

Read more Show less

Print spec

Formats
stl
Model files
5
Total size
291.1 KB
Largest file
117.5 KB

0 comments

See all