Skip to main content
F3D
**Ống dẫn quạt cho máy in 3D QIDI X-CF Pro Low Temp** 1

1 image

Máy In 3D

**Ống dẫn quạt cho máy in 3D QIDI X-CF Pro Low Temp**

By Elphwrkz

Downloads
184
Likes
10
Views
967
Remixes
1

Files 2 791.1 KB

  • Low_Temp_Layer_Fan_Duct_1766397017.stlSTL · 385.5 KB
  • Low_Temp_Layer_Fan_Duct_1766397018.stepSTEP · 405.6 KB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 1

See all 1 remix

Details

Model ID
#38096
Category
Máy In 3D
Published

Description

This is a high flow cross path fan duct for the QIDI Tech X-CF Pro Low Temperature Extruder. The duct is attached the same as the stock fan, but requires slightly longer M3 screws.

The stock duct blows air from just one direction while this is a cross flow fan duct which cools more evenly resulting in better overhangs.

While the duct is intended to blow air below the nozzle and heat block, some air will still hit the nozzle and heat block so it is important to use a silicone sock to keep the temperatures stable and protect the tips of the duct.

Printed as orientated with supports Touching Buildplate only.

Enhanced PLA will work since the fan is self cooling and is for the low temperature extruder, but higher temp filaments such as PETG or Polycarbonate are recommended.

Read more Show less

Print spec

Formats
stepstl
Model files
2
Total size
791.1 KB
Largest file
405.6 KB

0 comments

See all