
Ngàm gắn ống 4 inch cho Ikea UPPATVIND
Remix of Mod Activated Carbon cho Ikea UPPATVIND By AndysTechLab
- Downloads
- 3
- Likes
- 1
- Views
- 54
- Remixes
- 0
- Comments
- 0
Files 4 1.4 MB
- frame_4inch_1778345627.stepSTEP · 544.4 KB
- frame_pin_4x_1778345628.stepSTEP · 7.2 KB
- frame_4inch_1778345629.stlSTL · 820.5 KB
- frame_pin_4x_1778345631.stlSTL · 18.6 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #380282
- Category
- Máy In 3D
- Published
Description
Created this part from a viewer request - so i haven't printed this part, just did the CAD!
In this frame the stock cloth filter gets inserted
Due to better print orientation i made the pins a seperate part
The four pins can just be pressed in(should be a tight fit)
Print settings:
Walls: 4
Infill: 30-40%
Top/Bottom Shells: 4
Use any support for the small lip at the bottom
The pin holes dont need suppport but it doesn't really matter
For the full active carbon filter module check out my other model!
changelog
07.05.26 release
Print spec
- Formats
- stepstl
- Model files
- 4
- Total size
- 1.4 MB
- Largest file
- 820.5 KB
0 comments
You may also like 12 models
See all-

-

-

-
New -

-
New -

-

-

-

-

-


