Tấm hông kệ modular — 150 cm

This side panel connects two horizontal shelves as part of a modular shelving system. It allows you to extend an existing shelf unit by adding another vertical section, or to build a small freestanding (including desktop) shelf using two or more side panels and one or more shelves.

Key difference from corner brackets: this part does not need to be fixed to the wall — it is part of the load‑bearing structure itself.

Applications:

• Extend an already installed shelf — add one more vertical section.

• Build a compact freestanding shelf (e.g., on a desk) from two or more side panels and one or more shelves.

Dimensions:

• Height: 150 cm

• Depth: from 120 cm — determined by the board (shelf) you use

• Width: limited only by board dimensions and strength

Recommended assembly sequence:

1. Screw the side panels to the board using two screws each.

2. Place the assembled structure where it will stand and mark the mounting holes.

3. Detach the panels from the board and screw them to the installation surface using the pre‑marked holes.

4. Reattach the board to complete the assembly.

The kit includes two files:

Original file in .FCStd format (FreeCAD 1.1) — for changing the height, width, and screw holes.

Ready-to-print .3mf profile (Bambu Studio) — optimized settings for PETG.

Note: The model does not include the shelves (boards) themselves — we assume the use of lumber of a suitable cross-section and fasteners based on the type of materials used.