Skip to main content
F3D
The Porta‑Punisher (Bài Torture Test Multi Color) 1

6 images

Máy In 3D

The Porta‑Punisher (Bài Torture Test Multi Color)

By Bag0chips_2022313

Downloads
128
Likes
32
Views
525

Files 2 8.7 MB

  • Porta-Punisher_1778174098.3mf3MF · 1.8 MB
  • Porta-Punisher_vF1_1778174099.stlSTL · 6.9 MB

Make a variant with AI

Build another version of this model.

Open Studio

Description

The Porta‑Punisher:

The Porta‑Punisher is a compact, functional torture test designed to reveal how well your printer handles real‑world geometry under challenging conditions. This tiny porta‑potty features overhangs, bridges, thin walls, internal cavities, and long vertical surfaces that expose issues with cooling, flow control, and mechanical accuracy.

The hinge mechanism is intentionally tolerance‑sensitive: a successful print allows the door to swing freely and close under its own weight without sticking or needing to be pried open. This makes it an excellent indicator of dimensional accuracy, pressure‑advance tuning, and single-line bridging as the top surface of the door is chamfered.

Inside the potty, overhangs, vents, and small internal features test cooling performance and stringing control. The tall exterior walls highlight Z‑seam consistency, Vertical Fine Artifacts (VFAs), and ringing. Thin wall sections stress extrusion width calibration and pressure‑advance behavior. For (single nozzle) multi‑material printers, the model also exposes color bleed, registration accuracy, and purge efficiency.

IF YOU DOWNLOAD THE STL:

In your slicer be sure to separate the object into parts. Then you may assign the colors of your choosing to each object. 

A successful print should have these attributes:

  • Door swings freely and closes automatically under its own weight

  • No prying needed to open the door — hinge rotates smoothly

  • Clean overhangs on the roof and door lip with no drooping

  • Bridges are flat across the doorway and interior spans

  • Minimal stringing inside the cabin and around the door gap

  • Consistent walls with smooth surfaces and minimal VFAs

  • Z‑seam is clean and doesn’t wander or bulge

  • Thin walls print evenly with no gaps or over‑extrusion

  • Color boundaries are sharp with no color bleed (multi‑material)

  • First layer is solid with no lifting or elephant’s foot

  • Door handle, vents, and small details are crisp and well‑defined


An unsuccessful print might have these attributes:

  • Door sticks, binds, or needs to be forced open

  • Door won’t close on its own (tolerance or elephant’s foot issue)

  • Sagging overhangs on the roof or door lip

  • Drooping bridges across the doorway or interior ceiling

  • Heavy stringing inside the cabin or around the vented area

  • Visible VFAs, ripples, or inconsistent wall texture

  • Z‑seam blobs, bumps, or misalignment

  • Thin walls with gaps, bulges, or inconsistent extrusion

  • Color bleed or ghosting between materials (single nozzle multi‑material)

  • Blobs or roughness inside the toilet bowl

  • Warping or lifting at the base

  • Small features (vents, handles) appear melted or misshapen

Some Examples:

Stringing Along the Vented Area

Color Bleed Along the Door and Walls (Single nozzle, Multi Color)

Be sure to share your results!


Read more Show less

Print spec

Formats
3mfstl
Model files
2
Total size
8.7 MB
Largest file
6.9 MB

0 comments

See all