
FusionClaw - Càng tôm thiết kế bằng AI
- Downloads
- 0
- Likes
- 0
- Views
- 34
- Remixes
- 0
- Comments
- 0
Files 2 423.8 KB
- FusionClaw_1778121615.3mf3MF · 211.9 KB
- F_Claw_fixed_1778121616.3mf3MF · 211.9 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #374997
- Category
- Giáo Dục
- Published
- License
- Creative Commons — Attribution
Description
A stylized lobster claw designed entirely through AI-assisted CAD: geometry generated via Claude driving Autodesk Fusion 360 through the Fusion MCP server, no human hands on the UI
This model was created as a benchmark for AI-driven CAD workflows and concrete 3D printing feasibility on the M3-CRETE open-source concrete printer (m3-crete.com).
Geometry notes Single solid body. Asymmetric jaw design — dominant upper fixed jaw with a pronounced inward hook at the tip, smaller lower movable jaw curving up to meet it. Palm cross-section is flattened in the Y axis (narrow side-to-side) and tall in Z (deep in the hook/grip direction), which mirrors the actual mechanical cross-section of a chelae. Knuckle bump at the palm-to-finger junction. Aggressive wrist taper at the base.
Approximate dimensions: 320mm long × 55mm wide × 160mm tall (jaw-to-jaw open).
*I did push to far for flat inner claws - this made a fragment that required manual removal - that is the second file - which did require a slight touch of the human hand (F_Claw_fixed).
*Printing has not yet been attempted*
Printing — Polymer (traditional) Orient with the flat ventral palm surface on the bed, jaws pointing forward. Supports needed under the upper jaw. 15–20% infill sufficient for a display piece.
Printing — Concrete (M3-CRETE) Orient palm-flat on the print surface. Jaw tips are below minimum feature size for most concrete nozzles — truncate or accept rounding. Recommended minimum nozzle: 8mm. Scale up until acceptable resolution is reached.
Context Part of an ongoing comparison between Claude-via-chat, Claude Code + CADCLAW, and parametric methods for AI-assisted hardware design. Full write-up at sunn3d.com.
Sunnyday Technologies LLC — Appleton, WI m3-crete.com | cadclaw.io | cemforge.ai
Print spec
- Formats
- 3mf
- Model files
- 2
- Total size
- 423.8 KB
- Largest file
- 211.9 KB
0 comments
You may also like 12 models
See all-
New -

-

-

-

-

-

-

-

-

-

-


